NAME
    Data::ModeMerge - Merge two nested data structures, with merging modes
    and options

VERSION
    This document describes version 0.360 of Data::ModeMerge (from Perl
    distribution Data-ModeMerge), released on 2021-08-15.

SYNOPSIS
        use Data::ModeMerge;

        my $hash1 = { a=>1,    c=>1, d=>{  da =>[1]} };
        my $hash2 = { a=>2, "-c"=>2, d=>{"+da"=>[2]} };


        # if you want Data::ModeMerge to behave like many other merging
        # modules (e.g. Hash::Merge or Data::Merger), turn off modes
        # (prefix) parsing and options key parsing.

        my $mm = Data::ModeMerge->new(config => {parse_prefix=>0, options_key=>undef});
        my $res = $mm->merge($hash1, $hash2);
        die $res->{error} if $res->{error};
        # $res->{result} -> { a=>2, c=>1, "-c"=>2, d=>{da=>[1], "+da"=>[2]} }


        # otherwise Data::ModeMerge will parse prefix as well as options
        # key

        my $res = $mm->merge($hash1, $hash2);
        die $res->{error} if $res->{error};
        # $res->{result} -> { a=>2, c=>-1, d=>{da=>[1,2]} }

        $res = $merge({  a =>1, {  a2 =>1, ""=>{parse_prefix=>0}},
                      {".a"=>2, {".a2"=>2                       }});
        # $res->{result} -> { a=>12, {a2=>1, ".a2"=>2} }, parse_prefix is turned off in just the subhash


        # procedural interface

        my $res = mode_merge($hash1, $hash2, {allow_destroy_hash=>0});

DESCRIPTION
    There are already several modules on CPAN to do recursive data structure
    merging, like Data::Merger and Hash::Merge. "Data::ModeMerge" differs in
    that it offers merging "modes" and "options". It provides greater
    flexibility on what the result of a merge between two data should/can
    be. This module may or may not be what you need.

    One application of this module is in handling configuration. Often there
    are multiple levels of configuration, e.g. in your typical Unix
    command-line program there are system-wide config file in /etc, per-user
    config file under ~/, and command-line options. It's convenient
    programatically to load each of those in a hash and then merge
    system-wide hash with the per-user hash, and then merge the result with
    the command-line hash to get the a single hash as the final
    configuration. Your program can from there on deal with this just one
    hash instead of three.

    In a typical merging process between two hashes (left-side and
    right-side), when there is a conflicting key, then the right-side key
    will override the left-side. This is usually the desired behaviour in
    our said program as the system-wide config is there to provide defaults,
    and the per-user config (and the command-line arguments) allow a user to
    override those defaults.

    But suppose that the user wants to *unset* a certain configuration
    setting that is defined by the system-wide config? She can't do that
    unless she edits the system-wide config (in which she might need admin
    rights), or the program allows the user to disregard the system-wide
    config. The latter is usually what's implemented by many Unix programs,
    e.g. the "-noconfig" command-line option in "mplayer". But this has two
    drawbacks: a slightly added complexity in the program (need to provide a
    special, extra comand-line option) and the user loses all the default
    settings in the system-wide config. What she needed in the first place
    was to just unset *a single setting* (a single key-value pair of the
    hash).

    Data::ModeMerge comes to the rescue. It provides a so-called "DELETE
    mode".

     mode_merge({foo=>1, bar=>2}, {"!foo"=>undef, bar=>3, baz=>1});

    will result ini:

     {bar=>3, baz=>1}

    The "!" prefix tells Data::ModeMerge to do a DELETE mode merging. So the
    final result will lack the "foo" key.

    On the other hand, what if the system admin wants to *protect* a certain
    configuration setting from being overriden by the user or the
    command-line? This is useful in a hosting or other retrictive
    environment where we want to limit users' freedom to some levels. This
    is possible via the KEEP mode merging.

     mode_merge({"^bar"=>2, "^baz"=>1}, {bar=>3, "!baz"=>0, qux=>7});

    will result in:

     {"^bar"=>2, "^baz"=>1, qux=>7}

    effectively protecting "bar" and "baz" from being overriden/deleted/etc.

    Aside from the two mentioned modes, there are also a few others
    available by default: ADD (prefix "+"), CONCAT (prefix "."), SUBTRACT
    (prefix "-"), as well as the plain ol' NORMAL/override (optional prefix
    "*").

    You can add other modes by writing a mode handler module.

    You can change the default prefixes for each mode if you want. You can
    disable each mode individually.

    You can default to always using a certain mode, like the NORMAL mode,
    and ignore all the prefixes, in which case Data::ModeMerge will behave
    like most other merge modules.

    There are a few other options like whether or not the right side is
    allowed a "change the structure" of the left side (e.g. replacing a
    scalar with an array/hash, destroying an existing array/hash with
    scalar), maximum length of scalar/array/hash, etc.

    You can change default mode, prefixes, disable/enable modes, etc on a
    per-hash basis using the so-called options key. See the OPTIONS KEY
    section for more details.

    This module can handle (though not all possible cases)
    circular/recursive references.

MERGING PREFIXES AND YOUR DATA
    Merging with this module means you need to be careful when your hash
    keys might contain one of the mode prefixes characters by accident,
    because it will trigger the wrong merge mode and moreover the prefix
    characters will be stripped from the final result (unless you configure
    the module not to do so).

    A rather common case is when you have regexes in your hash keys. Regexes
    often begins with "^", which coincidentally is a prefix for the KEEP
    mode. Or perhaps you have dot filenames as hash keys, where it clashes
    with the CONCAT mode. Or perhaps shell wildcards, where "*" is also used
    as the prefix for NORMAL mode.

    To avoid clashes, you can either:

    *   exclude the keys using
        "exclude_merge"/"include_merge"/"exclude_parse"/"include_parse"
        config settings

    *   turn off some modes which you don't want via the "disable_modes"
        config

    *   change the prefix for that mode so that it doesn't clash with your
        data via the "set_prefix" config

    *   disable prefix parsing altogether via setting "parse_prefix" config
        to 0

    You can do this via the configuration, or on a per-hash basis, using the
    options key.

    See Data::ModeMerge::Config for more details on configuration.

OPTIONS KEY
    Aside from merging mode prefixes, you also need to watch out if your
    hash contains a "" (empty string) key, because by default this is the
    key used for options key.

    Options key are used to specify configuration on a per-hash basis.

    If your hash keys might contain "" keys which are not meant to be an
    options key, you can either:

    *   change the name of the key for options key, via setting
        "options_key" config to another string.

    *   turn off options key mechanism, by setting "options_key" config to
        undef.

    See Data::ModeMerge::Config for more details about options key.

MERGING MODES
  NORMAL (optional '*' prefix on left/right side)
     mode_merge({  a =>11, b=>12}, {  b =>22, c=>23}); # {a=>11, b=>22, c=>23}
     mode_merge({"*a"=>11, b=>12}, {"*b"=>22, c=>23}); # {a=>11, b=>22, c=>23}

  ADD ('+' prefix on the right side)
     mode_merge({i=>3}, {"+i"=>4, "+j"=>1}); # {i=>7, j=>1}
     mode_merge({a=>[1]}, {"+a"=>[2, 3]}); # {a=>[1, 2, 3]}

    Additive merge on hashes will be treated like a normal merge.

  CONCAT ('.' prefix on the right side)
     mode_merge({i=>3}, {".i"=>4, ".j"=>1}); # {i=>34, j=>1}

    Concative merge on arrays will be treated like additive merge.

  SUBTRACT ('-' prefix on the right side)
     mode_merge({i=>3}, {"-i"=>4}); # {i=>-1}
     mode_merge({a=>["a","b","c"]}, {"-a"=>["b"]}); # {a=>["a","c"]}

    Subtractive merge on hashes behaves like a normal merge, except that
    each key on the right-side hash without any prefix will be assumed to
    have a DELETE prefix, i.e.:

     mode_merge({h=>{a=>1, b=>1}}, {-h=>{a=>2, "+b"=>2, c=>2}})

    is equivalent to:

     mode_merge({h=>{a=>1, b=>1}}, {h=>{"!a"=>2, "+b"=>2, "!c"=>2}})

    and will merge to become:

     {h=>{b=>3}}

  DELETE ('!' prefix on the right side)
     mode_merge({x=>WHATEVER}, {"!x"=>WHATEVER}); # {}

  KEEP ('^' prefix on the left/right side)
    If you add '^' prefix on the left side, it will be protected from being
    replaced/deleted/etc.

     mode_merge({'^x'=>WHATEVER1}, {"x"=>WHATEVER2}); # {x=>WHATEVER1}

    For hashes, KEEP mode means that all keys on the left side will not be
    replaced/modified/deleted, *but* you can still add more keys from the
    right side hash.

     mode_merge({a=>1, b=>2, c=>3},
                {a=>4, '^c'=>1, d=>5},
                {default_mode=>'KEEP'});
                # {a=>1, b=>2, c=>3, d=>5}

    Multiple prefixes on the right side is allowed, where the merging will
    be done by precedence level (highest first):

     mode_merge({a=>[1,2]}, {'-a'=>[1], '+a'=>[10]}); # {a=>[2,10]}

    but not on the left side:

     mode_merge({a=>1, '^a'=>2}, {a=>3}); # error!

    Precedence levels (from highest to lowest):

     KEEP
     NORMAL
     SUBTRACT
     CONCAT ADD
     DELETE

CREATING AND USING YOUR OWN MODE
    Let's say you want to add a mode named "FOO". It will have the prefix
    '?'.

    Create the mode handler class, e.g. "Data::ModeMerge::Mode::FOO". It's
    probably best to subclass from Data::ModeMerge::Mode::Base. The class
    must implement name(), precedence_level(), default_prefix(),
    default_prefix_re(), and
    merge_{SCALAR,ARRAY,HASH}_{SCALAR,ARRAY,HASH}(). For more details, see
    the source code of Base.pm and one of the mode handlers (e.g.
    NORMAL.pm).

    To use the mode, register it:

     my $mm = Data::ModeMerge->new;
     $mm->register_mode('FOO');

    This will require "Data::ModeMerge::Mode::FOO". After that, define the
    operations against other modes:

     # if there's FOO on the left and NORMAL on the right, what mode
     # should the merge be done in (FOO), and what the mode should be
     # after the merge? (NORMAL)
     $mm->combine_rules->{"FOO+NORMAL"} = ["FOO", "NORMAL"];

     # we don't define FOO+ADD

     $mm->combine_rules->{"FOO+KEEP"} = ["KEEP", "KEEP"];

     # and so on

FUNCTIONS
  mode_merge($l, $r[, $config_vars])
    A non-OO wrapper for merge() method. Exported by default. See "merge"
    method for more details.

ATTRIBUTES
  config
    A hashref for config. See Data::ModeMerge::Config.

  modes
  combine_rules
  path
  errors
  mem
  cur_mem_key
METHODS
    For typical usage, you only need merge().

  push_error($errmsg)
    Used by mode handlers to push error when doing merge. End users normally
    should not need this.

  register_mode($name_or_package_or_obj)
    Register a mode. Will die if mode with the same name already exists.

  check_prefix($hash_key)
    Check whether hash key has prefix for certain mode. Return the name of
    the mode, or undef if no prefix is detected.

  check_prefix_on_hash($hash)
    This is like "check_prefix" but performed on every key of the specified
    hash. Return true if any of the key contain a merge prefix.

  add_prefix($hash_key, $mode)
    Return hash key with added prefix with specified mode. Log merge error
    if mode is unknown or is disabled.

  remove_prefix($hash_key)
    Return hash key will any prefix removed.

  remove_prefix_on_hash($hash)
    This is like "remove_prefix" but performed on every key of the specified
    hash. Return the same hash but with prefixes removed.

  merge($l, $r)
    Merge two nested data structures. Returns the result hash: {
    success=>0|1, error=>'...', result=>..., backup=>... }. The 'error' key
    is set to contain an error message if there is an error. The merge
    result is in the 'result' key. The 'backup' key contains replaced
    elements from the original hash/array.

FAQ
  What is this module good for? Why would I want to use this module instead of the other hash merge modules?
    If you just need to (deeply) merge two hashes, chances are you do not
    need this module. Use, for example, Hash::Merge, which is also flexible
    enough because it allows you to set merging behaviour for merging
    different types (e.g. SCALAR vs ARRAY).

    You might need this module if your data is recursive/self-referencing
    (which, last time I checked, is not handled well by Hash::Merge), or if
    you want to be able to merge differently (i.e. apply different merging
    modes) according to different prefixes on the key, or through special
    key. In other words, you specify merging modes from inside the hash
    itself.

    I originally wrote Data::ModeMerge this for Data::Schema and
    Config::Tree. I want to reuse the "parent" schema (or configuration) in
    more ways other than just override conflicting keys. I also want to be
    able to allow the parent to protect certain keys from being overriden. I
    found these two features lacking in all merging modules that I've
    evaluated prior to writing Data::ModeMerge.

HOMEPAGE
    Please visit the project's homepage at
    <https://metacpan.org/release/Data-ModeMerge>.

SOURCE
    Source repository is at
    <https://github.com/perlancar/perl-Data-ModeMerge>.

BUGS
    Please report any bugs or feature requests on the bugtracker website
    <https://rt.cpan.org/Public/Dist/Display.html?Name=Data-ModeMerge>

    When submitting a bug or request, please include a test-file or a patch
    to an existing test-file that illustrates the bug or desired feature.

SEE ALSO
    Data::ModeMerge::Config

    Other merging modules on CPAN: Data::Merger (from Data-Utilities),
    Hash::Merge, Hash::Merge::Simple

    Data::Schema and Config::Tree (among others, two modules which use
    Data::ModeMerge)

AUTHOR
    perlancar <perlancar@cpan.org>

CONTRIBUTORS
    *   Steven Haryanto (on PC) <stevenharyanto@gmail.com>

    *   Steven Haryanto <steven@masterweb.net>

COPYRIGHT AND LICENSE
    This software is copyright (c) 2021, 2016, 2015, 2013, 2012, 2011, 2010
    by perlancar <perlancar@cpan.org>.

    This is free software; you can redistribute it and/or modify it under
    the same terms as the Perl 5 programming language system itself.